ME / SERIES MARC II Forced Draft Burners

The ME/Series burner is available to burn gas, #2 oil, #4 oil, #6 oil and gas/oil combination and is available in 6 model sizes for boilers ranging in size from 80HP to 250HP. The ME/Series is approved for use in NYC by the Department of Air resources and the City of New York Department of Buildings.  The MEA number on the ME/Series is MEA-159-74-E.

Marc II Burners
The Marc II uses Forced Draft Technology (for firing against high furnace pressure)  which is suitable for neutral or negative draft systems.
The Marc II burners utilize an advanced air handling system resulting in low blower motor horsepower, significantly lower noise levels and the ability to fire against higher furnace pressures.

Swing Away Air Housing The hinged air housing provides easy access to the nozzle, scanner, pilot and diffuser for inspection or removal.  No disconnection of fuel or power lines is required.
Precise Oil Metering The positive displacement piston type oil metering unit is an outstanding design feature on all Industrial Combustion air atomizing burners.  This unit precisely meters oil volume and is not affected by changes in oil temperature or viscosity. Accurate and reliable at all firing rates, the oil metering unit is mounted on the burner and is driven by a separate motor.  Shown to the right is IC's L-Pump.
Oil Nozzle The Industrial Combustion designed low pressure air atomizing nozzle achieves the best atomization of oil for each burner model and application. Air is purged through the large nozzle orifice after each burner cycle to prevent afterdrip and fouling.
Air Compressor Module A remote air compressor module provides atomizing air for all No. 6 oil burners and other large oil models. The module includes IC's rotary vane, pressure lubricated air compressor, air/oil lubricating reservoir, oil level indicator, inlet air filter, air pressure adjusting valve and air pressure gauge.
Efficient Gas Combustion Gas is introduced through orifices ahead of the diffuser providing superior mixing of gas and air with excellent flame retention at all firing rates. The gas manifold is standard on all oil burners for future gas firing.
Combustion Air Impeller The heart of the burner's combustion air system is a highly efficient backward curved aluminum impeller.  The impeller maintains its original balance by not collecting dirt on the vanes as will ordinary forward curved impellers.  Impellers can be provided for high furnace pressure, high altitude and 50 cycle applications.

U.L. Listed
Every Industrial Combustion burner is assembled and fire tested at the factory.

To download Product Information on the ME Burners Click Here

<TOP>